鏈輪式漿液閥安裝尺寸以及外形圖

產品概述
鏈輪式漿液閥型號為ZL73X，驅動裝置主要使用在需要長距離操作的閥門上，通過鏈輪驅動裝置與閥門其它部件裝配連接；通過拉動手拉鏈條，實現對閥門進行遠距離的手動操作，使閥門使用更加靈活，不受電力與氣源的限制。
本閥門適用于糖漿、紙漿、泥漿、污水、煤漿等介質管路上，作啟閉調節和節流使用，適用于水平安裝，亦可傾斜安裝。
技術參數范圍
公稱通徑：DN50-DN1000
公稱壓力：0.6MPa，1.0MPa
適用溫度：≤80℃
密封型式：軟密封
泄 漏 量：A級（零泄漏）
材質屬性：閥體：鑄鐵；閘板：不銹鋼；閥桿：2Cr13；填料：聚四氟乙烯；閥體密封圈：合成橡膠或聚四氟乙烯
Product introduction
Chainwheel slurry valve models for ZL73X type, drive device is mainly used in need long operation of the valve, through chain wheel drive and other valve assembly connection;By pulling hand chain, realize to remote manual operation of the valve, the valve to use more flexible, not restricted by electricity and gas source.
The valve is suitable for pipeline conveying such mediumsin cluding syrup,paper pulp,sludge,sewage,coal slurry,etc.for controlling switching on/off and throttling.It allows horizontal mounting as well as inclined mounting.
Technical Parameter Range
Nominal pressure:0.6MPa，1.0MPa
Nominal diameter:DN50-DN1000
Suitable temperature:≤80℃
Seal type:Teflon soft seal
Material properties: body: cast iron;Ram: stainless steel;Stem: 2 cr13;Packing: ptfe.The body sealing ring: synthetic rubber or ptfe

主要外形及連接尺寸Profile and connection dimension											單位Unit:mm
PN	DN	L	D	D1	D2	H	N-M	PN	DN	L	D	D1	D2	H	N-M
0.6	50	40	125	100	90	285	4-16	1.0	50	40	125	100	99	285	4-16
	65	40	145	120	100	298	4-16		65	40	145	120	120	298	4-16
	80	50	160	135	125	315	4-16		80	50	160	135	135	315	4-16
	100	50	180	155	145	365	4-16		100	50	180	155	155	365	4-16
	125	50	210	185	175	400	4-16		125	50	210	185	185	400	4-16
	150	60	240	210	200	475	4-20		150	60	240	210	210	475	4-20
	200	60	295	265	255	540	4-20		200	60	295	265	265	540	4-20
	250	70	350	320	310	630	8-20		250	70	350	320	310	630	8-20
	300	70	400	368	362	780	8-20		300	80	400	368	375	780	8-20
	350	80	460	429	412	885	10-20		350	90	460	429	435	885	10-20
	400	80	515	482	462	990	10-22		400	120	515	482	485	990	10-22
	450	90	565	532	518	1100	14-22		450	120	565	532	545	1100	14-22
	500	100	620	585	568	1200	14-22		500	130	620	585	609	1200	14-22
	600	100	725	685	670	1450	14-27		600	140	725	685	720	1450	14-27
	700	100	940	800	775	1700	16-27		700	140	940	800	788	1700	16-27
	800	120	950	905	880	2000	16-27		800	150	950	905	898	2000	16-27
	900	120	1050	1005	980	2300	20-30		900	150	1050	1005	998	2300	20-30