近年來,我國電動閥具有良好的前景

In recent years, electric valves have good prospects in our country

 

在最近幾年，隨著機電一體化的發展，電動閥的重要機械產品迎來了前所未有的市場。比傳統電動閥閥（手動閥，氣動閥）來源多一天的工作，安全可靠。在該呼叫為環境和安全越來越高的今天，電動閥是不可缺少的。巨大的市場需求正變得越來越高，以電動閥的要求。

 

電動閥門應用領域廣泛，涉及石油，化工，電力，核電，冶金，造船，輕工，食品，市政等。在產品本身方面，電動閥的裝配容易，故障率低，并能滿足工業自動化的需求，行業的優勢是更具成本效益的選擇。因為使用一般傳統氣動閥的，不能避免如管道，電磁閥和所述壓縮機是成功的。

 

在電機驅動andelectric閥，安裝簡單方便，并且電動調節閥的安裝可以合作的工廠原來的控制電路，其他費用可以節省。此外，打開和關閉的電機驅動方式更加流暢，沒有過多的動量矩故障率可大幅降低。

 

石化行業主要采用API標準的閘閥，截止閥和止回閥;電力部門主要采用電站用高溫壓閘閥，截止閥，止回閥供水低壓蝶閥，閘閥排水閥和安全閥及一部分;化工行業主要采用不銹鋼閘閥，截止閥，止回閥。

 

冶金行業主要采用低壓大口徑蝶閥，氧氣截止閥和球閥;城建部門主要采用低壓閥，如城市自來水管道主要采用大口徑閘閥，建筑施工主要采用中線蝶閥，城市供熱主要采用金屬密封蝶閥等;管道主要采用平板閘閥和球閥;制藥行業主要采用不銹鋼球閥;食品行業主要采用不銹鋼球閥等。

 

  新品種電動閥門是閥門行業，因此電動閥門市場前景十分廣闊，代工企業應該更多地了解這個行業，提供鑄造零部件行業，電動閥，以推動鑄造行業的發展的新興產業，為了獲得新的發展勢頭。

 

  隨著市場的方向轉型，電動閥門產品也相應地改變。例如，隨著石油開發向內地油田和海上油田的轉移，以及從300000千瓦300000萬千瓦火電機以上的火電及水電和核電發展下的電力行業，電動閥產品應根據設備的應用程序域的變化，以改變其性質和相應的參數。

 

  和城市系統將使用大量的低壓電動閥，以及環保和節能，即通過采用低壓力的鐵門朝環保橡膠板的發展，平衡閥，過渡金屬密封蝶閥閥及中線密封蝶閥，石油和天然氣工程在流水線的方向發展，它需要大量的平板閘閥及球閥。

 

  電廠建設朝向大規模發展，所以大直徑和高壓溢流閥和減壓閥，在同一時間的需要也需要快速開啟和關閉電動閥;針對包工程供應電動閥的，需要由單一品種向多品種和規格。需要電動閥的項目，由電動閥的制造商都發展趨勢是越來越大提供的。

 

  未來電動閥門科技市場的不斷發展，以高科技含量，高參數，耐強腐蝕，高壽命方向發展。

 

In recent years, with the development of electromechanical integration, an important mechanical products of electric valve ushered in the unprecedented market. Than traditional electric valve valve (manual valve, pneumatic valve) source more day on the job, safe and reliable. In the call for environmental and safety is higher and higher today, electric valve is indispensable. The huge market demand is becoming more and more high to the requirement of electric valve.

 

Electric valves wide application field, involves the petroleum, chemical industry, electric power, nuclear power, metallurgy, shipbuilding, light industry, food, municipal, etc. In terms of the product itself, the electric valve for easy assembly, low failure rate, and can meet the demand of industry automation, the advantages of the industry is more cost-effective option. Because of the use of general traditional pneumatic valves, not avoid such as piping, solenoid valve and the compressor to be successful.

 

In motor drive andelectric valve, simple and convenient installation, and electric valve installation can cooperate factory original control circuitry, other costs can be saved. In addition, the open and close more smooth in motor drive way, without too much momentum moment failure rate can be greatly reduced.

 

Petrochemical industry mainly USES the API standard gate valve, globe valve and check valve; Power sector mainly adopts power station with high temperature and pressure gate valve, globe valve, check valve and relief valve, and part of the water supply and drainage valve of low pressure butterfly valve, gate valve; The chemical industry mainly adopts stainless steel gate valve, globe valve, check valve.

 

Metallurgical industry mainly adopts low voltage large diameter butterfly valve, oxygen cut-off valve and ball valve; Urban construction department mainly adopts low-pressure valve, such as urban tap water pipeline mainly adopts large-diameter gate, building construction mainly adopts center line butterfly valve, city heating mainly adopts the metal sealing butterfly valve, etc.; Pipeline mainly adopts flat gate valve and ball valve; The pharmaceutical industry mainly adopts stainless steel ball valve; The food industry mainly adopts stainless steel ball valve and so on.

 

  New varieties of electric valve is the valve industry, so the electric valve market prospect is very broad, foundry enterprises should know more about the industry, provide casting parts for the industry, the emerging industry of electric valve to driving the development of foundry industry, in order to obtain the new development momentum.

 

  With the transformation of the direction of the market, products of electric valve also change accordingly. For example, as oil development to the mainland oil fields and the transfer of offshore oil field, as well as the electric power industry from 300000 kw to 300000 kw thermal power under the above of the thermal power and hydropower and nuclear power development, electric valve products should be based on equipment application domain changes to change its properties and corresponding parameters.

 

  And the urban system will use a large number of low voltage electric valve, and to the development of environmental protection and energy-saving, namely by the use of low pressure iron gate toward environmental protection rubber sheet, balance valve, the transition metal sealing butterfly valve and the midline sealing butterfly valve, oil and gas engineering to develop in the direction of pipelining, it requires a lot of flat gate valve and ball valve.

 

  Power plant construction toward large-scale development, so the need of large diameter and high pressure relief valve and pressure reducing valve, at the same time also need quick opening and closing electric valves; Aiming at the need of package engineering and supply of electric valve by a single species to more varieties and specifications. Required for a project of electric valve, provided by a manufacturer of electric valve all trend is more and more big.

 

  Future electric valves with the continuous development of science and technology market, to high technology content, high parameter, strong corrosion resistance, high life direction.